Got this in a trade and decided to build it up. I need to know what noticeable parts am I missing. I know I'm missing motor, body work, clip ons, left rear set, gauge and headlight wiring harness, and hardware. Can you guys lmk the obvious of what I'm missing here so I can complete this project. Also I have some questions on what parts I have so I can label everything.
Got this in a trade and decided to build it up. I need to know what noticeable parts am I missing. I know I'm missing motor, body work, clip ons, left rear set, gauge and headlight wiring harness, and hardware. Can you guys lmk the obvious of what I'm missing here so I can complete this project. Also I have some questions on what parts I have so I can label everything.
Frame, forks, swing arm, wheels, rear shock
Parts laid out
What are these?
Rear brake switch. it mounts on the right rearset
From what I can see: Dog bone, rear caliper bracket, rear brake lever, both rear sets, axle adjuster blocks
Throttle cables?
Yes
Axles
Ground wire. Goes from your battery to a bolt under the tank on the frame. The connector should plug into the ECU somewhere
No idea. Could be the speed sensor.
Looks like either injectors or fuel pump harness
Brembo?
Brembo master cylinder
All help is appreciated.
My comments in RED
Also, I didn't see any front brake lines. I'll have some available by the end of this week if you need them