Auxillary bulb help!!!

[R6'n-Santibanez]

So i just finished installing a L.E.D Strip for my license plate (cause i put it where the 2 push pins under the battery box), wired it to the license plate light wires and now my auxiliary bulb was flickering now not working, i replaced it and same thing happened.....anybody know whats going on or how to fix it?? anybody else have the same issue??

Thanks

[hector113]

unplug the led strip and see if it works.

[R6'n-Santibanez]

i put in a new bulb and it works but it flickers n im sure it will burnt out like the previous bulb...anybody have the same issues or similar??

[R6'n-Santibanez]

anyone??

[EL CHE]

Re-check your wiring. Make sure your wires are not crossed and use sealed connectors so you dont cause a short. Check your fuses as well.

Do you have anything else wired that may be aftermarket? (i.e. integrated tail light)

[R6'n-Santibanez]

sorry i should have posted my mods in the 1st post...motodynamic tail light,(ebay)led flushmounts,krypton hids,.....i wired the led strip 2 the stock connectors i dont know why it effects the aux light....and what do u mean by sealed connectors??

[hector113]

Take the leds off to see if it fixes the aux light.

[R6'n-Santibanez]

it does but why would it effect the aux light?

[EL CHE]

Originally Posted by R6'n-Santibanez

sorry i should have posted my mods in the 1st post...motodynamic tail light,(ebay)led flushmounts,krypton hids,.....i wired the led strip 2 the stock connectors i dont know why it effects the aux light....and what do u mean by sealed connectors??

Sealed connectors are to ensure there is no bare metal making contact with other metals causing a short.


Chances are that the LED strip could be defective from factory. Ebay = made in china

[hector113]

Originally Posted by R6'n-Santibanez

it does but why would it effect the aux light?

the leds are bad and its making a dead sort.