Motodynamic nightmare

[daddyo]

I have tried to install a smoked Integrated tail light everything went smoothly until I reassembled the fairings. Then I realized the rear only flashed on 1 side non stop it wouldn't turn off and the other turn signal would not work. I switched the connector then the same problem in reverse. To make matter worse the 6 Phillip head plastic caps wont unbolt to remove the upper-tail fairing. I already broke 1. I am just disgusted with myself right now. I would appreciate any ideas

[Devsterman]

Do you have any pictures?

First, check the harness that came with the tail light. They should look like this. If not, correct it.

[daddyo]

The harness has 3 wires Red, black & white

[Devsterman]

Could you please take some pictures, and post them, so we can help you out a little more?

[daddyo]

will do

[r6sport]

Pretty straight forward. Pics will help a ton! Have you looked at the "How-to"?

[daddyo]

Problem solved I was connecting the entire wrong things I didnt connect the black & grey plastic things I was plugging the metal connectors and leaving the plastic connectors free just a newbie messing up. I love the light

[motoman21]

What year is the how to for? Trying to install this on a '12

[atxrider07]

Originally Posted by motoman21

What year is the how to for? Trying to install this on a '12

just installed it on my 2012 a few weeks ago. pretty simple install, a true plug and play.. i did do some research on how to remove the old taillight before i actually bought it... you can find alot of good info on here and on youtube. some advise, if you are going to install a new tailight, buy a FE, if your going to change that as well... its easier to install both at the same time.

[motoman21]

Cool, seems easy enough. Just tight quarters, tiny trunk space.