Slipper Clutch Mod...

[cj360v8]

Haven't heard anything, but I'm curious. Just have to wait until the 09 parts catalogs come out (publicly) I guess

[avaboothgreen]

Sorry to bring this one out of the archives.

Youngbulls pictures are just red squares; do I need to adjust my settings or something?

Would really like to try this mod this weekend if anyone is out there that can help. please.

[cj360v8]

Originally Posted by avaboothgreen

Sorry to bring this one out of the archives.

Youngbulls pictures are just red squares; do I need to adjust my settings or something?

Would really like to try this mod this weekend if anyone is out there that can help. please.

Dunno what's up with that. It's doing the same thing for me. I did find if you right click on the red square and select View Image (using firefox, might be different for other browsers), it will show the picture

[ichibon_kokojin]

As an admin for a shitload of servers... the pics were more than likey purged...
For some reason or another.

It is now at the freezing mark here in Texas and I am headed to the Bike house (my garage) to start this little under taking... Pics and all. I will be posting all in my site whne complete stay tuned as i do killer Step-by-Step write ups.

[orientexpress11]

Originally Posted by ichibon_kokojin

As an admin for a shitload of servers... the pics were more than likey purged...
For some reason or another.

It is now at the freezing mark here in Texas and I am headed to the Bike house (my garage) to start this little under taking... Pics and all. I will be posting all in my site whne complete stay tuned as i do killer Step-by-Step write ups.

A step-by-step write up w/good pictures would be greatly appreciated. I'm debating on doing this mod myself but I'm afraid of this shyte breaking on me half way through the season and causing a lot of trouble.

[chanman_nyhc]

easy to do mod try the "stepped" version first before cutting off all the tabs. remember to reinstall clutch plates exactly as removed and soak them in oil before reinstall

[ichibon_kokojin]

Well I have done it... but getting the clutch cover back on is a (*^)(Y(_^#^%#% .

I decided to go with leave the two inner sprigs in tact and turn the top spring into a washer.

I have the pics but they are too large to upload...
I will have the complete write up by Sunday as i have twistie ride which is a good test..

[ichibon_kokojin]

As promised the clutch mod is complete....
And I must say this little mod is worth the few hours it took to do it.

What I don't get is why Yamaha did not do it from the factory as the sell a BShit kit that does the same thing...

Check it out.
http://apexridersdfwmc.com/shopTalk.html

If you guys discover anything strange let me know please...

So far I am loving this NO COST mod.

[chrisc6]

Does the clutch slip alot more, or just a little. In stock form the rear wheel skips all over on hard downshifts. Im wondering should i just spend the money and get an stm or yoyodyne. If the mod makes a big difference i will get rearsets instead. Do you know if the 2 full 1 washer works better than 1 full ,-6mm, -12mm method. Im going to do track days this coming season and i want to do this mod. I checked the part #'s with yamaha, the part # is the same for the y-spring on the 08 and 09.

[56cbr600rr]

My top clutch plate or two came loose and i'm not 100% sure I got it back in the EXACT way it was. It's the same order, just might be spun a few degrees one way or the other. does it really matter?