So I bought these LED rear blinkers.

[trapspeed]

And the damn things don't have directions. They have two wires coming out of each, and both are black. Do I just splice the stock connector and wire it with that or what? Is one supposed to be a ground? Ghetto eBay blinkers.

[04DeadRedHead]

Do they replace the entire rear tail lights, or are they incorporated into the stock tail lights?

[trapspeed]

It came with a FE kit I got. It replaces the stock rear turn signals.

[04DeadRedHead]

Originally Posted by trapspeed

It came with a FE kit I got. It replaces the stock rear turn signals.

Do you have a link for what you bought? Are they mini stalks? Or tiny leds???

I am not very good with electronics and I installed new tail lights with ease the other day. But it sounds like you just have LEDs, and I dont know where you plan on mounting them, or if they are supposed to integrate into the current tails.

Try to give more details...

[sexxysixx]

just connect one wire to one, and the other wire to another. if it dont work, switch the other way it should work. same thing happen to my led signal.

[azmic]

Originally Posted by sexxysixx

just connect one wire to one, and the other wire to another. if it dont work, switch the other way it should work. same thing happen to my led signal.

word. or if you have like a 9v battery layin around, use that

[BlitzedR6]

mine diddnt come with any either... i just took the found out which wires were for the stock signals then just it hooked it up the same using the integrated.

[04DeadRedHead]

Originally Posted by BlitzedR6

mine diddnt come with any either... i just took the found out which wires were for the stock signals then just it hooked it up the same using the integrated.

well sure. im just wondering how you mounted them. Did the LEDs go INSIDE the stock tail light? Or did you mount them somewhere else??