So I just took off my grey fairings on my bike to replace the exhaust, and on both fairings, there is a scratch running from one end to the other, throught the yamaha logo. again, on BOTH sides. I havnt been down, layed it over, hit anything, etc. I CANNOT FIGURE IT OUT!! both of these marks are almost a mirror image of each other. anyone else have similar scratch that they cant figure out?
__________________
2007 R6 Blue:
PM me for POWDER COATING DEALS!!! I powder coat for fun, and to pass on the good faith to other riders. I'm not making a profit, so this ain't advertising.
SHOGUN sliders
Full Graves Titanium
PCIII
Rumble Concepts F.E.
BMC Race Filter
RK Gold Chain
Vortex Sprockets -1 +2 PC'd w/ my special blend
Graves race replica graphics kit
Graves smog block off plates
tinted tail light
flushmounts
custom race stripe graphics
Blue LED street glow effects
Galfer Stainless Steel lines
Michelin PP 2ct front, PP race PR3 rear
DB Windscreen (Puig, Blue)
Custom embroidered seats
Custom Dyno Mapping
HID 6000k kit w/ slim ballasts
Stomp Grip
Powder coating has begun!! so far:
EVERYTHING!!! Anything that was silver,
is now murdered out.
Future:
Custom milled levers
Thermal sensitive paint black to white.
I have a blue bike, so the the fairings are grey on bottom. (blinkers go in this fairing).
__________________
2007 R6 Blue:
PM me for POWDER COATING DEALS!!! I powder coat for fun, and to pass on the good faith to other riders. I'm not making a profit, so this ain't advertising.
SHOGUN sliders
Full Graves Titanium
PCIII
Rumble Concepts F.E.
BMC Race Filter
RK Gold Chain
Vortex Sprockets -1 +2 PC'd w/ my special blend
Graves race replica graphics kit
Graves smog block off plates
tinted tail light
flushmounts
custom race stripe graphics
Blue LED street glow effects
Galfer Stainless Steel lines
Michelin PP 2ct front, PP race PR3 rear
DB Windscreen (Puig, Blue)
Custom embroidered seats
Custom Dyno Mapping
HID 6000k kit w/ slim ballasts
Stomp Grip
Powder coating has begun!! so far:
EVERYTHING!!! Anything that was silver,
is now murdered out.
Future:
Custom milled levers
Thermal sensitive paint black to white.
oh you may be right. I did load it into a truck....SH*T
__________________
2007 R6 Blue:
PM me for POWDER COATING DEALS!!! I powder coat for fun, and to pass on the good faith to other riders. I'm not making a profit, so this ain't advertising.
SHOGUN sliders
Full Graves Titanium
PCIII
Rumble Concepts F.E.
BMC Race Filter
RK Gold Chain
Vortex Sprockets -1 +2 PC'd w/ my special blend
Graves race replica graphics kit
Graves smog block off plates
tinted tail light
flushmounts
custom race stripe graphics
Blue LED street glow effects
Galfer Stainless Steel lines
Michelin PP 2ct front, PP race PR3 rear
DB Windscreen (Puig, Blue)
Custom embroidered seats
Custom Dyno Mapping
HID 6000k kit w/ slim ballasts
Stomp Grip
Powder coating has begun!! so far:
EVERYTHING!!! Anything that was silver,
is now murdered out.
Future:
Custom milled levers
Thermal sensitive paint black to white.
haha still working on it. but I did get my full graves and PCIII ! stoked aboot that.
__________________
2007 R6 Blue:
PM me for POWDER COATING DEALS!!! I powder coat for fun, and to pass on the good faith to other riders. I'm not making a profit, so this ain't advertising.
SHOGUN sliders
Full Graves Titanium
PCIII
Rumble Concepts F.E.
BMC Race Filter
RK Gold Chain
Vortex Sprockets -1 +2 PC'd w/ my special blend
Graves race replica graphics kit
Graves smog block off plates
tinted tail light
flushmounts
custom race stripe graphics
Blue LED street glow effects
Galfer Stainless Steel lines
Michelin PP 2ct front, PP race PR3 rear
DB Windscreen (Puig, Blue)
Custom embroidered seats
Custom Dyno Mapping
HID 6000k kit w/ slim ballasts
Stomp Grip
Powder coating has begun!! so far:
EVERYTHING!!! Anything that was silver,
is now murdered out.
Future:
Custom milled levers
Thermal sensitive paint black to white.
I've only helped with loading a bike on a truck ONCE. It was my old GS500f when i sold it. The bottom scraped the ramp a bit, but luckily it was only the exhaust header pipe.
__________________
Proud Member of Team: TELETUBBY RACING
2007 Yamaha YZF-R6s Blue
Micron exhaust | 3000K HID | Custom Fender Eliminator | Blue LED lights
Scorpion Alarm | Soupy's Lowering Link | K&N Air Filter | Brake Light Strobe
PM me for POWDER COATING DEALS!!! I powder coat for fun, and to pass on the good faith to other riders. I'm not making a profit, so this ain't advertising. 
Linear Mode
