Didnt get it from you guys, but got it new, for &0 bucks. Local guy ordered it from you guys, but sold the bike and then when it showed up on his door step, he called me and told me 70 takes it. So its new, from you guys, I just didnt get it from you.
__________________
Quote:
Originally Posted by dannyjames1684
wearing a jacket and carrying my lid is like a cop pulling a gun...it just makes my cock seem larger
hey guys question is there any difference between the stainless and taitanium exhuast other than weight?
I ask because I already have a weight disadvantage so a couple of kg could be easier lost by the rider.
Are the flow rates the same any other difference?
__________________
NZ rider
07 R6 white track
GPR damper v 1
yec ecu and loom
pcv with Autotune
full akrapovic race system
dna filter
Graves block offs
-1 front sprocket
Stomp Grip
Vortex clip on and rear sets
ohlins ttx rear shock
ohlins nix 25 on 08 fork tubes
08 triple tree
2010 R6 black road
gpr v4 damper
pcv
dna filter
GYTR slip on
mid pipe
puig screen
hi I just finished installing a graves full ss exhaust on my 2012 r6. and I noticed the O2 sensor is in the way of the spring that holds the muffler to the mid pipe. and also the clearance of the muffler tip and the swing arm is almost rubbing. I tried turning the muffler, and resetting it, but didn't work. I do have aftermarket driven rearsets so I'm not sure if this would affect the way the muffler mounts.
The spring will touch the 02 bung but the muffler should clear the swingarm no problem. I'm not sure about other companies' rearsets. I'd assume the mount is in the exact location as stock but you would need to refer to your stock rearsets to verify that..
The spring will touch the 02 bung but the muffler should clear the swingarm no problem. I'm not sure about other companies' rearsets. I'd assume the mount is in the exact location as stock but you would need to refer to your stock rearsets to verify that..
thanks for the response. I was able to fix the clearance issue by mounting the muffler clamp to the front side of the rearset instead of the back.
Meant to call yesterday but got ties up all day at work, and also had to put a hold on my CC since I've got some unauthorized charged on it; if I call, will I be able to place an order by way of Pay pal money request?
Linear Mode
