Starting to stunt

[12 O'clockR6]

Ive been doing wheelies for a few years pretty good and miles long, just went up to a 52 tooth sprocket and my cage and scrape bar is on the way besides the 3rd brake anyone got some suggestions on what else i should do to set my 04 R6 up? Anyone have an idea how to adjust my idle up like 1k? And what about pads and rotors all around any specific brand i should get, something good braided lines??? any suggestions would be great thanks for the help

[cashmoneyflo]

the idle adjustment is on the right side of the bike where the lower and mid fairing meets. gold adjuster knob

[TwizzY]

[12 O'clockR6]

thanks guys if anybody's got other suggestions please don't hold back

[blindboy2k1]

some good gear , or at least wear something when ur learning , other you could mess your self up and then you might never learn . other then that , steel braded brake lines are pretty essential if you wanna do stoppies and such , other then that it sounds like you got everything you might need .

[T-Neck]

Steel lines feel a bit stiffer, but i personally like my rubber lines, with a radial master. Factory Yamaha Pads are the best.

[skunkie]

im not sure if you have to do the sump mod on a r6 but you deff want to do the airbox mod so it doesnt fill up with oil

[skunkie]

and t neck that r6 is sick

[T-Neck]

thank you sir.