Just made this great wheelie.. did you see it?!
Join Date: Feb 2019
2018 R6 FTECU Auto Blipper and QSS
I replied to another topic but I wanted to get this in the general forum.
I have a 2018 R6 brand new from the dealer. I wanted Auto Blip and Quickshifter so my dealer recommended FTECU (which I regret ). I purchased it $800 wasted dollars just to find out it DOES NOT WORK on this model bike.
I have gone back and forth with FTECU and all they do is make me feel stupid and that I should just learn how to fix it. They are incredibly UNHELPFUL. Anyway, here is my experience
1. The black PULL side works but the red push side does not. No matter how you flip it GP shift etc only one side will ever work.
2. I checked continuity in every way possible and it mechanically works. It tones out from the shifter (up and down) all the way to the harness on the ECU.
3. I have flashed the ECU with multiple images, everything is enabled.
4. I have even loaded the stock image and tried to enable it with holding up the gear shift and did what motonosity has done.
I contend that this bike does not and will not see both side of the switch. I think it will only see pull (which makes sense because it does support QSS but it doesn't say it supports Auto blip)
But yet Auto blip works just fine when assigned to the pull side of the switch.
I am at my wits end and they refuse to refund the money or even provide quality support to help me.
now I will give the credit in that they did send out a new switch and we very nice at first but, as I checked all the things the blamed it on, things changed and the guy then gave me crap about how much time he spent dealing with me. After checking my phone logs I have spent 1 hour 16 minutes total on the phone with them.
So I will be moving on to Translogic as it bypasses the ECU. Ill keep y'all posted.
I will freely admit im wrong and apologize to FTECU if somebody can make this work. But im pretty sure that's not going to happen.
Last edited by LiquidAreSix; 06-02-2019 at 02:59 PM.