FS: 06-16 R6 Stock Part Out - Yamaha R6 Forum: YZF-R6 Forums
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 23 (permalink) Old 04-14-2019, 07:37 AM Thread Starter
Just made this great wheelie.. did you see it?!
 
Cibber14's Avatar
 
Join Date: Mar 2016
Location: Brighton, MI
Posts: 56
Bike: 2007 R6
FS: 06-16 R6 Stock Part Out

Trying to off the rest of my R6 parts I won't be needing.
Located in Brighton/Metro Detroit. Shipping isn't an issue and usually goes out the same day, or next.
Located in Brighton/Ann Arbor, MI.
Any issues/damage are noted below.
Prices are all OBO, within reason.

2006-16 Parts
Frame sliders - I think they are Vortex - no damage - $50 shipped

2006-07 R6 parts
Frame - clean title - $600 plus shipping
Fuel tank - Nearly mint - $400 shipped
Forks - Straight - No issues - Black - $200 shipped
Subframe and tray - $145 shipped
Radiator w/ fans - $130 shipped
Lock set - Ignition/Gas Cap/Seat Lock - $100 shipped
Clip ons - $65 shipped for both
Swing arm - Clean, no damage - $50, shipping extra
Wire harness - $80 shipped
Fairing stay - $45 shipped
Upper and lower triple set - Staight, no issues - $120 shipped
Rear sets with shift rod - $100 shipped
Front calipers - $100 shipped
Rear brake master, line, and rear caliper - $50 shipped
ECU - $95 shipped
Ignition coils (Set of 4) - $45 shipped
Headlights - $100 shipped
Rectifier - $30 shipped
Mirrors - $40 shipped
Air box - $40 shipped
BMC air filter (2X) - Like new - $40 shipped
Horn - $10 shipped
Stator - $45 shipped
Fuel pump - $75 shipped
Rear shock - $50 shipped
Passenger pegs - $45 shipped
Switches - $50 for both, $30 each

2008+ Parts

Subframe and tray - Straight - $160 shipped
Mirrors - $50 shipped
Passenger pegs - $45 shipped
Rear sets with shift rod - $100 shipped
Fuel pump - $75 shipped

I'm sure I'm missing some things, so if it's not listed, ask and I may have it.

**Engine parts**

I have an 06, 07, and 08 that have various issues.
06 - Runs, but needs a valve adjustment and cam chain tensioner
07 - Spun bearing
08 - Threw a rod, hole in the block
Tons of good parts on the three engines, let me know what you need.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.

To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.


Sent from my XT1650 using Tapatalk

-Chad
Cibber14 is offline  
Sponsored Links
Advertisement
 
post #2 of 23 (permalink) Old 04-14-2019, 09:06 AM
I eat my R6
 
KBkilla's Avatar
 
Join Date: May 2012
Posts: 260
Bike: 2012 R6
re: FS: 06-16 R6 Stock Part Out

Do you have the fuel tank and cowl for the 08?
KBkilla is offline  
post #3 of 23 (permalink) Old 04-14-2019, 06:10 PM Thread Starter
Just made this great wheelie.. did you see it?!
 
Cibber14's Avatar
 
Join Date: Mar 2016
Location: Brighton, MI
Posts: 56
Bike: 2007 R6
re: FS: 06-16 R6 Stock Part Out

Quote:
Originally Posted by KBkilla View Post
Do you have the fuel tank and cowl for the 08?
Already sold. Thanks though.

Sent from my XT1650 using Tapatalk

-Chad
Cibber14 is offline  
 
post #4 of 23 (permalink) Old 04-14-2019, 11:02 PM
My R6 eats me.
 
chriss614's Avatar
 
Join Date: Apr 2019
Posts: 16
re: FS: 06-16 R6 Stock Part Out

What color are the passenger footpegs and do they have any damage? Need some for my 09 r6.

Sent from my ONEPLUS A6013 using Tapatalk
chriss614 is offline  
post #5 of 23 (permalink) Old 04-15-2019, 02:41 AM Thread Starter
Just made this great wheelie.. did you see it?!
 
Cibber14's Avatar
 
Join Date: Mar 2016
Location: Brighton, MI
Posts: 56
Bike: 2007 R6
re: FS: 06-16 R6 Stock Part Out

Silver. No damage.

Sent from my XT1650 using Tapatalk

-Chad
Cibber14 is offline  
post #6 of 23 (permalink) Old 04-29-2019, 03:05 PM
My R6 eats me.
 
Join Date: Apr 2019
Posts: 2
How much for one of the BMC air filters?
203Ruby is offline  
post #7 of 23 (permalink) Old 04-30-2019, 12:29 PM
I eat my R6
 
Join Date: Nov 2009
Posts: 430
Need a good cylinder head. Prefer to have cams and caps with it. Thanks
pseager is offline  
post #8 of 23 (permalink) Old 05-02-2019, 07:01 AM
My R6 eats me.
 
Join Date: May 2019
Posts: 1
Frame still available?
Elijah_c is offline  
post #9 of 23 (permalink) Old 05-02-2019, 02:03 PM
Why yes I don't!!!!!!!!!!
 
TurboBlew's Avatar
 
Join Date: Jun 2010
Location: FL
Posts: 4,681
Bike: 2007 In Heaven
Re: FS: 06-16 R6 Stock Part Out

Quote:
Originally Posted by pseager View Post
Need a good cylinder head. Prefer to have cams and caps with it. Thanks
I wouldnt entertain buying one without the caps...lol.
Unless yours is completely destroyed... its less risk to rebuild your own.
Components are going to run north of $2,000 if you want minty high performance fresh. About $135 per valve, spring, collets, etc. X 16
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.
TurboBlew is offline  
post #10 of 23 (permalink) Old 05-02-2019, 04:24 PM
I eat my R6
 
Join Date: Nov 2009
Posts: 430
Re: FS: 06-16 R6 Stock Part Out

Quote:
Originally Posted by TurboBlew View Post
I wouldnt entertain buying one without the caps...lol.
Unless yours is completely destroyed... its less risk to rebuild your own.
Components are going to run north of $2,000 if you want minty high performance fresh. About $135 per valve, spring, collets, etc. X 16
To view links or images in this forum your post count must be 5 or greater. You currently have 0 posts.
Good point on the caps, just figured I would make a point of it. Have two sitting in my garage; one is cooked/warped and the other has the bore on the exhaust cam deformed. Not sure what caused it, but the lower half of the exhaust journals are rolled over (oil starved? could have been that I didn't plastigage when I swapped out the cooked head). Just finishing putting new rings in, was putting on the head and trying to set timing but couldn't turn the motor over. Turned over fine without cams in and upon further inspection found the journals mashed up. Not sure how a machine shop would fix it.

I've come to terms that I'll never be able to afford a new / rebuild a cylinder head.
pseager is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Yamaha R6 Forum: YZF-R6 Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in











Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: 2009 R6 Stock Part Out John Orchard Bike Parts For Sale 67 06-14-2019 01:01 PM
FS: 17-18 R6 Stock Parts sideburn34 Bike Parts For Sale 18 06-06-2019 06:22 AM
FS: 2014 R6 Stock & Aftermarket Part Out R1ricer Bike Parts For Sale 66 02-19-2019 08:23 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome