Re: How To: DIY YEC Interface Cable For $25 or less.
little bit of topic, but in german forums there is a bit of confusion about accessing original ECUs that have been flashed to yec spec.
I cant say much about the technical conversion of my 07 RJ11 to yec spec (ECU and harness) but it works like a charm to access the ECU with YMS.
I dont really know why but i had to select the base data of 08 Yamaha. Maybe the mechanic who converted the bike flashed the 08 Yec spec to that 07 stock ECU
By now tested with genuine Yec Usb TTL Cable, but the parts that Nz08R6 recommend in this thread are allready ordered :-)
After test with selfmade cable i will give you guys feedback here ;-)
Thanks again a lot to Nz08R6 for sharing his knowledge