Update for the 2017 r6, maybe some one will chime in, otherwise this is for future owners with similar problem. As I said the bike was crashed on the left side. I bought the 4pin to odb2 connector off eBay, and pulled the codes this morning. Got a few codes back tire code and another, but notably was the p2122 and p2128 something with the accelerator timing sensor. Pulled off all the crap to get to the sensor on the throttle body, and everything checked out ok, checked all connections and nothing was loose or damaged Cleared the codes, tried to start and still no start, but no new codes were tripped. That leaves me to think the fuel pump was bad from the crash. Pulled it out and tested it with the multimeter, seemed to me that the manual didn’t give much information on the “number 3” float position, but seems the resistance is a bit high for the manual specs. Found a replacement pump
On ebay for $70, so I’ll give that a try and update after. If anyone has an idea why the bike started barley a couple times and won’t run now help would be appreciated.