Yamaha R6 Forum: YZF-R6 Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. Garage / Mechanical Help
    Does anyone know what would cause a brand new throttle position sensor to be thrown out of spec after a few miles of riding? I replaced my TPS because I thought it was the culprit to my issue of the bike dying randomly while riding. But, this new TPS is doing the same exact thing that my old...
  2. Garage / Mechanical Help
    Update I went back outside and started trying to diagnose it some more. Tested output voltage of new TPS for throttle valves and found out I did not have it positioned correctly. I adjusted it and got my output voltage to read .6190 volts when valves are closed which is good. Spec is...
  3. Garage / Mechanical Help
    Hello guys. i'm new here First time. my name is Remzi i am from Baku city. have a 2006 yamaha r6, they recently assembled the motor for new parts. I have a problem: I’m going to 4th gear, let’s let it go if I press the clutch and let off the gas, the motor stalls, it doesn’t hold idle. start...
  4. Garage / Mechanical Help
    Okay, so I have a 2007 Yamaha YZF-R6 (YZFR6W/2C0 model) with a PC5, K&N Air Filter, header back VooDoo Exhaust (with baffle and silencer). And before you say it, yea I have already disconnected the PC5 and it's wired as stock. Well my problem this time, to put it plainly, is a code 15. I ran...
1-4 of 4 Results
Top