Yamaha R6 Forum: YZF-R6 Forums banner
valve clearance
1-4 of 4 Results
  1. Garage / Mechanical Help
    Hey everybody! So here's the deal got an 08' r6r. She's got 50k miles on her. Bought it at 34k. Pretty stock bike. No tune, slip on exhaust, and still has stock headers and cat. As soon as I bought it I went in to do the usual tune-up stuff. Got in to do valve clearances and found that my...
  2. Garage / Mechanical Help
    Hi, Need some advice on my track bike 2008 Yamaha R6 I am getting Zero clearances on intake valves (Cly 3 and 4) (0.12 to 019mm is the range) I have tried checking with as low as 0.004 mm and no give Any help in terms of what direction I should go would be a big help From reading this...
  3. Garage / Mechanical Help
    Firstly, hello to anyone who is reading or attempting to help me. I appreciate it. I’ve got an 04 R6 with 40K kilometres. First time doing a valve check/adjustment. I’m at the measuring stage and I’ve run into an obstacle. I’ve followed the instructions in factory service manual word for...
  4. Exhaust and fuel delivery
    I went to adjust my valve clearances instead of paying $600 but just checked them and they were within spec. But now that I got the spark plugs in the Ignition cables in the valve cover on And the throttle bodies and Air filter Box back on I'm lost. I somehow messed up. The 2nd pic is of 2 rad...
1-4 of 4 Results
Top