Yamaha R6 Forum: YZF-R6 Forums banner

1 - 9 of 9 Posts

·
Just another r6'er
Joined
·
955 Posts
Discussion Starter · #1 · (Edited)
So I'm installing my pcv and autotune and I can't find the o2 sensor plug under the tank. So i decided to remove my o2 sensor since i need to change it anyways and trace it.

Anyways when i disconnected the exhaust o2 sensor i found this (pic attached) What are these two wires? They weren't connected at all. I guess the previous owner disconnected? Is it okay to remove completely with the 02 sensor?

thanks,


 

·
Just another r6'er
Joined
·
955 Posts
Discussion Starter · #3 ·

·
Just another r6'er
Joined
·
955 Posts
Discussion Starter · #5 ·

·
Just another r6'er
Joined
·
955 Posts
Discussion Starter · #7 ·
perfect thanks
 

·
Registered
Joined
·
2,893 Posts
As mentioned above, don't remove the servo without buying or making an EXUP plug. I just bought one, as it was easier, but it wasn't exactly cheap. MJS usually has them in stock.
 

·
Just another r6'er
Joined
·
955 Posts
Discussion Starter · #9 ·
Yeahh, i remember seeing the threads about how to remove it. I knew where the motor was and all just never knew those were the cables. I'm leaving them there, in the winter i will be removing it, plus lots of other mods :D
 
1 - 9 of 9 Posts
Top