Yamaha R6 Forum: YZF-R6 Forums banner

1 - 5 of 5 Posts

·
Intermediate Knee Dragger
Joined
·
1,309 Posts
Everything. Top and bottom triple clamps, brake calipers, brake rotors, clipons, and probably a few other things.
 

·
Registered
Joined
·
2,472 Posts
You'll need to press out the steering stem bearing and press in the one from the 05. Then you'll need basically every part off the 05 like stated. The also redid the frame in 05 to handle the different (and larger) forces that USD forks put into the neck area of the frame. So they may fit, but they won't be optimized.
 
1 - 5 of 5 Posts
Top