Yamaha R6 Forum: YZF-R6 Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hello guys in need of your help. I just purchased a 05 r6, I love the bike. The guy who sold it to me removed the brake lights with intentions of installing a smoked integrated break light. This is my first bike, is their anyone out there with a picture or a how to video or can walk me through how to install the brake lights/turning signals. It seems pretty easy, I just don't know what wire goes where. I'll attach what I'm looking at down below thanks a lot.

File_001.jpeg
 

·
Registered
Joined
·
5 Posts
Discussion Starter #5
I did some further digging to realize the previous owner cut the wiring harness 🤦🏽‍♂️ Does anyone know if I’m able to directly wire these back together if so what wire goes where ... thanks in advance!!
 

Attachments

·
Registered
Joined
·
2 Posts
The main wires you need to look at are the Black, Blue/Red and the Yellow wires coming from the harness.
Try testing it in the following sequence:

1. Black to Black
2. Red to Yellow
3. White to Blue/Red

or

1. Black to Black
2. Red to Blue/Red
3. White to Yellow

I am 99% positive that the black wire is the ground wire.
 

·
Registered
Joined
·
5 Posts
Discussion Starter #8
The main wires you need to look at are the Black, Blue/Red and the Yellow wires coming from the harness.
Try testing it in the following sequence:

1. Black to Black
2. Red to Yellow
3. White to Blue/Red

or

1. Black to Black
2. Red to Blue/Red
3. White to Yellow

I am 99% positive that the black wire is the ground wire.
This is very helpful I’m going to give it a try here in a bit!!! Thanks a bunch bro
 
1 - 8 of 8 Posts
Top