[Exchobo]

Hey!
So I got some weighted bar ends but they need to slide into the handbar itself. Problem is that there the stock weight/damper inside the handbar itself with a screw hole. Anyone have an experience taking these out? I've provided a diagram below. For the right side, its number 12. And for the left, its number 4.

Thanks!

 

[Twiztid_R6]

Sometimes you can just use a longer screw and work then out, a slide hammer may help also.

 

[Exchobo]

Sometimes you can just use a longer screw and work then out, a slide hammer may help also.

yeah i got it out. Took a lot more with a slide hammer than I expected.
thanks!