Yamaha R6 Forum: YZF-R6 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
95 Posts
Discussion Starter · #1 ·
I have an 07 R6 with a PCV, autotune, and just got a QEM and quickshift set-up to go along with it. I am having some issues with the qucikshifter not working and I was wondering if the QEM may not be compatible with the 07 R6. Anyone running a PCV and quickshift successfully on an 06/07?
 

·
Registered
Joined
·
95 Posts
Discussion Starter · #3 ·
You got it backwards, its not required if you have the SFM as the SFM controls the secondary injectors. My QEM is for an 09 R6 thats why I am wondering if it works on an 07.
 

·
Registered
Joined
·
95 Posts
Discussion Starter · #6 ·
Yes its the correct ones, you guys cut the wires wrong so the "long and skinny" wires were short and skinny, and the "short and fat" wires were long and fat. I had the qem wired in backwards because I didnt check the width of the wires just the length. Its good now though.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top