Yamaha R6 Forum: YZF-R6 Forums banner

1 - 2 of 2 Posts

·
Horny for R6!
Joined
·
23 Posts
Discussion Starter #1
Hey guys,
So there have been a few threads already about this sprocket setup, however, everyone talks about doing the 520 conversion with this setup... I really dont wanna go to a 520 due to the significant increase in wear as well as the performance increase being basically negligible.. at least for me. I am just wondering if this setup is possible on the stock 525 chain? I have about 4500kms on the chain, if the stretch has to be taken into account. I have found 525 compatible sprockets (15 and 47's), but I just need to know if the chain will be long enough?

Thanks :)

PS: It's an 07 R6.
 

·
R6 Pilot
Joined
·
783 Posts
yeh the chain will b fine , altho its reccomended to change chain & sprockets at the same time so they wear the same. i kept my stock 525 when i got new sprockets & it lasted me 22k miles.
 
1 - 2 of 2 Posts
Top