Yamaha R6 Forum: YZF-R6 Forums banner
1 - 9 of 9 Posts

· Moderatore Eccellente!
Joined
·
7,906 Posts
Unless you have a carb sychro, I wouldn't touch it. You can really make you bike run like crap.
 

· Garage Queen R6
Joined
·
716 Posts
That link does not answer his question. To get to the fuel mixture screw, you need to remove the carbs from the bike. Next to the float bowls, there is a metal cap that you will need to drill out to access the mixture screw. Are you installing a jet kit? or just adjusting for altitude changes?
 

· Registered
Joined
·
116 Posts
Discussion Starter · #5 ·
That link does not answer his question. To get to the fuel mixture screw, you need to remove the carbs from the bike. Next to the float bowls, there is a metal cap that you will need to drill out to access the mixture screw. Are you installing a jet kit? or just adjusting for altitude changes?
Just wondering, cuz i bought the bike from a dealer and they arent sure if it jetted, and im not sure if it has been jetted, and usually with jet kit they have drilled it for the adjustment screw right? So if its drille chances are its jetted.
 
1 - 9 of 9 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top