Yamaha R6 Forum: YZF-R6 Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
I have a 2003 YZF600R I have taken the carburetors off and cleaned them. I rejected it and now it is stuck on high idle say for maybe 5,000 RPMs and I seem to have developed a cam guide seal and valve cover gasket leak why is my bike idling so high and how do I get it to idle down I have the idle adjustment screw all the way out
 

·
Registered
Everything you need to know is in the Service Manual !
Joined
·
177 Posts
I have a 2003 YZF600R I have taken the carburetors off and cleaned them. I rejected it and now it is stuck on high idle say for maybe 5,000 RPMs and I seem to have developed a cam guide seal and valve cover gasket leak why is my bike idling so high and how do I get it to idle down I have the idle adjustment screw all the way out
Could be tps could be stuck float needle. Check your tps in diag
 
1 - 4 of 4 Posts
Top