Yamaha R6 Forum: YZF-R6 Forums banner
1 - 1 of 1 Posts

The E-racings Guy
82 Posts
Discussion Starter · #1 ·
Deal fell through, so it is back for sale with a ever so slightly reduced price for what I had offers for it.

I am thinking I want to try out one of the newer R6's so the gsxr is going up for sale.

-clean title
-been down 2 times, both at barber, has a little rash on the right side of the frame, not rash but "pebble knicks" in the frame. Right side has very very little rash on the bodywork, 45 minute fix to be perfect again.

-4,000 miles (+/- a few, don't have the bike right here to look at, 2,800 were street miles, the rest were a few trackdays and 4 race weekends)

-E-racings bodywork, 2 sets, set on the bike with a superbike tail, and a brand new set in the box that I haven't even pulled out yet.

-pazzos, shorties ($159)
-tiforce rearsets ($400)
-vortex clipons ($100)
-M4 full system ($900)
-IGN module
-quickshifter (whole PC, IGN mod, and quickshifter about $700)
- Galfer ss brake lines ($120)
-1/4 throttle (I believe, it's less than stock)
-Powdercoated orange stock wheels
-Gold Carrozzeria wheels ($1500+)
-Lightened rear rotor ($50)
-Driven 520 conversion (-1/+2) ($150)

The bike is a pretty awesome bike, and a guy that has had his bike professionally tuned by marrietta said it is a good bit stronger than his and it's running a map from the dynojet website on pump gas, Imagine if you took it to the guys at Marrietta motorsports and had them custom map it.

$6300 stock wheels, no spare bodywork
$6700 with the CZ wheels no spare bodywork, no stock wheels
$7000 for the entire package

bike located in Birmingham, AL

I have roughly $10,079 in the bike (honestly probably more)

205-281-8344 cell
[email protected]

ok ok.. the pics

1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.