Yamaha R6 Forum: YZF-R6 Forums banner
1 - 5 of 5 Posts

·
UR B-hind Da 8 Ball
Joined
·
6,465 Posts
First of all, your bodywork indicates that is a 2008, not 2007. That makes a difference if your problem is the throttle body servo.
Attached are screenshots of the manual for the faults you listed and what to look at:
Fault 19:
Font Parallel Number Document Pattern

Font Parallel Rectangle Number Document

Fault 30:
Font Parallel Number Document

Font Parallel Number Document Pattern

Fault 60:
Font Parallel Number Rectangle Document

Font Number Document Parallel
 

·
UR B-hind Da 8 Ball
Joined
·
6,465 Posts
Sales titles don’t always reflect model year. If the manufacture date is after Aug 07, then it is most likely an 08 model. As I said, the difference that may matter for you at the moment would be that servo code. If there is a mechanism inside the air box to lift the intake stacks, it’s an 08.
 

·
UR B-hind Da 8 Ball
Joined
·
6,465 Posts
Not necessarily the codes, but what you look at, which wires to test, and what parts to order when you do figure out the problem.
 

·
UR B-hind Da 8 Ball
Joined
·
6,465 Posts
Get a manual for an 08 first. You can get it from the “Files” tab on the R6_Forum.com Facebook page. Start by erasing the codes using D62. Then get it started again and see what codes come back. Then you can diagnose your issue better.

I definitely wouldn’t start with an ECU.
 
1 - 5 of 5 Posts
Top