Yamaha R6 Forum: YZF-R6 Forums banner

2019 R6 Transmission Issue?

107 Views 1 Reply 2 Participants Last post by  Intuit
I recently left my bike in my garage for a month while I changed the fairings and when I turned it back on it was stuck in 4th gear I could shift down to 3rd but after that it turns into a line like it’s in neutral then clutch is fine I can pull it in and free roll the bike but it won’t start even with it pulled in
1 - 2 of 2 Posts
There's a seam on the end of the shift rod sticking out of the transmission. (b)
Automotive design Line Parallel Engineering Auto part

Make sure that seam is lined up with the gap from the shift lever that slides onto the transmission shift rod.
The bolt is aluminum and is soft. Avoid over-tightening. This has to be removed with every oil change.
Rely on blue thread-locker adhesive instead of higher torque.
See less See more
1 - 2 of 2 Posts