Yamaha R6 Forum: YZF-R6 Forums banner
1 - 7 of 7 Posts

· Registered
7 Posts
Discussion Starter · #1 ·
This is going to be a track only bike. I have a ton of parts still coming. Looking to do an easy to work on bike. Here's the game plan.
  • .04 head gasket
  • Pair block offs
  • YEC harness
  • YEC edu
  • YEC throttle body clamps
  • YEC oil catch tank
  • Ohlins FKR carts with extended caps
  • Ohlins TTX shock
  • Ohlins 120mm damper with Melotti lateral mount
  • Drilled sub frame and relieved frame for top shock bolt access
  • Samco race hose kit
  • Cox radiator guard
  • Oz gass wheels
  • Beringer calipers
  • GaleSpeed master
  • IMA thumb brake and master
  • Core Moto custom lines with dry breaks
  • Attack rearsets
  • Evol Tech clipons
  • Graves shifter mount
  • Graves 2.0 radiator cap
  • Akrapovic full system
  • Translogic blip assist
  • Motoholders fairing stay and carbon air intake
  • MRA windscreen
  • Chrome plus dash
  • LocoMoto bodywork
  • Fast Frank Racing front & rear full kits
  • Underhung rear caliper mount captive with Fast Frank rear QC

    Not sure of brand came with bike on following :
  • Airbox cover with side tank covers
  • Swing arm & frame carbon covers
  • Rear carbon hugger
  • Front carbon fender

Tire Wheel Vehicle Automotive tire Motorcycle

Automotive tire Light Tire Tread Motor vehicle

Tire Wheel Automotive tire Hood Automotive lighting

Tire Wheel Motor vehicle Automotive tire Automotive design

Hood Motor vehicle Automotive tire Bumper Automotive exterior

Tire Wheel Vehicle Automotive tire Motor vehicle

Automotive tire Motor vehicle Auto part Gas Nut

Automotive tire Motor vehicle Automotive lighting Automotive design Carbon

Tire Fuel tank Wheel Automotive fuel system Vehicle


· Registered
7 Posts
Discussion Starter · #2 ·
Forgot a few:
YART abs delete
Suter slipper clutch
CRG MotoGP clutch lever & perch
Domino 1/4 turn throttle
Domino sb grips
Pro Bolt race spec bolts
GB Racing engine covers

Automotive tire Motor vehicle Automotive design Wheel Tire

· Registered
7 Posts
Discussion Starter · #3 ·
Waiting for new switch gear APX & Carraro Engineering bits. If you haven’t looked at the Carraro bits you should. Captive nut links, nice switch gear, upper & lower shock mounts with captive nuts. Frame and sub frame mods makes rear shock removal a quick change item. Also make these crazy quarter turn body work mounts where you cannot use a Dzus. Like bodywork that bolts to frame.

Brembo t-drive rotors
Graves steering stop
Graves A relay Arm Sganci rapidi carene
Captive nut link
1/4 turns
top triple
block off plates
Upper & lower shock mounts
Automotive tire Tire Camera accessory Synthetic rubber Tints and shades

Automotive tire Motor vehicle Automotive design Automotive exterior Automotive wheel system

Wheel Tire Automotive tire Light Tread

· YZFR6... ooodles of HP
1,695 Posts
How accurately do the gb covers fit to the engine covers?
1 - 7 of 7 Posts