Yamaha R6 Forum: YZF-R6 Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter #1
So I posted last night, ill post once more of the specific problem.

I installed a AFAM -1 / +2 kit with a RK WX chain.

Everything is to spec but I am getting a winding noise from the primary gear. Its exesive over 3rd gear and when I let off the gas its loud.

I disasembled everything and checked the work, no rubbing of any parts.

Is this normal to pick up the noise from the new kit? or does the stock set up just not wind due to the pitch?

Any info would be appreciated.
 

·
Registered
Joined
·
94 Posts
Discussion Starter #3
Well, I talked to a couple guys at Yamaha and they thing the rear sproket is out of round. The chain gets loose then tight again. Not over tight, but noticible. I'm going to call AFAM and go over there monday morning and try to get a new rear.

Thanks for your 2 cents bro. Any other info would be nice if you got any 8).

Over all the ride is fine, guy at Yamaha said it will wear in, but might take 500mi. So its worth getting a new sproket to me.
 
1 - 3 of 3 Posts
Top