Yamaha R6 Forum: YZF-R6 Forums banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
8,144 Posts
Discussion Starter · #1 ·
Well, ive got my bike apart gettin at the speedohealer. For some reason, the last week it has been cuttin in and out. I'll start off fine and everything will be workin and then a mile down the road the speedo will hit 0 and just stay there. Then for some reason another mile or so it'll spring back to life with my mph. I got it roughly a month and a half ago, maybe 2 months and its been perfect. I've disconnected it and reconnected it and still gives me an E. I just took it apart again and sprayed all my connectors with ECC hoping its a simple dirty connector. The wire isnt bent anywhere along the run. It goes strait from the speedo hookup, under the seat and strait into the tail. Any suggestions while shes apart?
 

·
Premium Member
Joined
·
8,144 Posts
Discussion Starter · #2 ·
Anybody?

It goes into t (test) mode and will pass the test. But as soon as i exit out of test mode it goes from slot 'A' strait to 'E'. No matter which buttons i push (select or set) it doesnt change. Doesnt matter how long i hold them either...
 
1 - 2 of 2 Posts
Top