[Heroooo]

I've tried searching the boards and google to no avail. The one thread I did find had broken pic links =(

I read through OhioYJ's stickys and I am still left at this question.

How do you install the AutoTune? I already have the PCV installed. Can anyone help with pics and directions? Thanks guys!

 

[grinchsr6]

http://www.powercommander.com/downloads/UserGuides/AT200/AT-200.pdf

 

[Heroooo]

Grinch, I appreciate it!

 

[Quiknen]

Ya just did mine, Used the same link,
The O2 sensor was easy to run and replace the stock.

Now if i can just figure out why i have no throttle response ('09) that would be great....

 

[grinchsr6]

Grinch, I appreciate it!

No worries. Hope you get it working.

 

[Heroooo]

No worries. Hope you get it working.

Just wanted to update ya. I did get it working. In all honesty, installing the Autotune was 10x easier than installing the PCV.

I got everything dialed in, and I'm just riding around for a bit until the Autotune gets some trims from my riding.

Thanks everyone!

 

[r6sport]

Did you have to install a new O2 bung?

 

[Heroooo]

I used the O2 sensor that the Autotune came with. Running just the PCV without the autotune, I installed the O2 bung.

 

[r6sport]

I used the O2 sensor that the Autotune came with. Running just the PCV without the autotune, I installed the O2 bung.

My 2006 R6S doesn't have an oxygen sensor. That is where the confusion came from. I will have to get one welded in.

 

[Heroooo]

I actually didn't know they made a PCV for the R6s! If so, then yeah, you will have to get it welded in.

UPDATE: The bike is running better and better. I need to ride it for a couple of more days, (rode it once this past week) for it to get a better idea of the trims. Thanks for all the help! The bike is a completely different beast, even from just the PCV!

 

[sealover09r6s]

If you use your taillight as a power tap which color wire should you tap into.