Yamaha R6 Forum: YZF-R6 Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1 (Edited)
Hey guys. I ride an '06 R6 and am looking at taking the stock mirrors off and putting a bar end mirror on it. few questions though.

1. Will any bar end mirror fit on any bike or do I need to buy an adapter set or a specific size bar end mirror set? this is the main question I have. And also 2" or 3" mirror?

2. Should I put 2 or just one bar end on? I know this is more or less preference, but what is your guys opinions?

3. I notice a lot of people that only put one bar end on usually put it on the left side. Is there a reasoning for this? The only reason i can think of is you can lift up your hand/arm and look easier without letting off the throttle.

thanks guys

EDIT: Also, if anyone could point out good brands that would be great.
 

·
Yeah Science!
Joined
·
7,339 Posts
I bought some cheapo ones from Amazon and it works pretty well. It cost like $25 bucks. I just used the stock bar ends and but the mirror inbetween the clip on and the bar end without using the internal adapter thing.

I only use it on the left side.
 
1 - 3 of 3 Posts
Top