Yamaha R6 Forum: YZF-R6 Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi guys I am nee on the forum and would appreciate any help . I have a Yamaha R6 2007 flashed ECU 520 sprocket conversion with a FT Ecu quick shifter. I drove my bike today what happens is when I accelerate quickly my bikes revs go up but I don’t get any power to the bike no speed increase but it revs this happens in all gears , any help is appreciated .
 

·
Registered
Joined
·
3,304 Posts
Thinking the same thing about the clutch.

But before we dive off the deep end, cross your fingers that it's just a simple mistake/issue first...

From what I've read though, clutch service isn't all that bad; just detailed or precise work.
 

·
Registered
Joined
·
20 Posts
Hi guys I am nee on the forum and would appreciate any help . I have a Yamaha R6 2007 flashed ECU 520 sprocket conversion with a FT Ecu quick shifter. I drove my bike today what happens is when I accelerate quickly my bikes revs go up but I don’t get any power to the bike no speed increase but it revs this happens in all gears , any help is appreciated .
Sounds like the clutch is slipping, make sure your clutch lever has enough free play
 

·
Registered
Joined
·
3,304 Posts
What @Koray said here...
 

·
YZFR6... ooodles of HP
Joined
·
1,477 Posts
Or worn friction plates reducing the clutch stack height causing slip.
 
  • Like
Reactions: 1202067
1 - 6 of 6 Posts
Top