Yamaha R6 Forum: YZF-R6 Forums banner
1 - 1 of 1 Posts

·
yarrrrrrrg 6
Joined
·
99 Posts
Discussion Starter · #1 ·
so when i changed out the subframe, i removed the tail light and re spliced it into the wires and everything. i wrote down where they came from so they went to the same place. now the light wont work right, i cant really tell if its the parking light that stays on or the actual brake light. either way when i pull the lever nothing changes. tried fidgeting with the rear sets a little too, nothing's working.

any idea's? suggestions? thanks
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top