Yamaha R6 Forum: YZF-R6 Forums banner

1 - 11 of 11 Posts

·
Vroooooooooooooom...
Joined
·
45 Posts
Discussion Starter · #1 ·
Hey, I just got my HID's and LED bulb for the center light.... but how do I get to it? the HID's are easy... don't require any stripping of fairings. Is the center light the same? or do I have to take off the whole front fascia ? :(

It looks like the lens just pops out, but let me know. thanks.
 

·
Registered
Joined
·
88 Posts
Hey, I just got my HID's and LED bulb for the center light.... but how do I get to it? the HID's are easy... don't require any stripping of fairings. Is the center light the same? or do I have to take off the whole front fascia ? :(

It looks like the lens just pops out, but let me know. thanks.
lol. I asked this same question yesterday in the How To forum :D and followed the suggested instructions. You need to take out the windscreen. Then you will see a rubber plug. Take it out and unscrew the screw under it. Then the light comes straight out. I used a thin knife on the side to pop it out. And here's the result:
 

Attachments

·
Registered
Joined
·
336 Posts
Yeah just pull back the windscreen some, dont have to remove it entirely.
Remove rubber plug, remove screw

carefully pry out center lense, it is kinda PITA, but it will pop out, it goes back in a lot easier for some reason
 

·
Registered
Joined
·
313 Posts
Slightly off-topic but what bulb number is the center bulb and where did you get your LED versions?
 

·
Registered
Joined
·
336 Posts

·
Registered
Joined
·
88 Posts

·
Vroooooooooooooom...
Joined
·
45 Posts
Discussion Starter · #9 ·
alright, thanks guys, i probably would have dis assembled everything haha
 

·
2 Fast 4 U
Joined
·
130 Posts
Thanks, guys. Now all I got to do is see if my '08 has the wiring in place.

I think its a lil different on the 08s isnt it? Dont you have to take the whole headlight out n a screw holds the light in from the back.. lemme know how it goes Gravis.
 
1 - 11 of 11 Posts
Top