Yamaha R6 Forum: YZF-R6 Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Well guys, I wandering if ya'll could help. I got the front brakes off my 02r6, but after that I can't get the main bolt that goes all the way through to loosen. After the brakes, what is the next thing that I do. I would appreciate any help.
 

·
Team: Teletubby racing
Joined
·
21,003 Posts
with my 04' i use a 32mm socket to get the nut off the axle, and tap the axle till it slides right threw
 

·
2007 R6
Joined
·
1,019 Posts
You need to loosen the two fork bolts on both sides first. I assume you haven't done that yet and then just get a cloth and cover the end of a socket wrench but it on the axle bolt and GENTLY tap it through.
 

·
2007 R6
Joined
·
1,019 Posts
The "but" it on the axle... should be (put)
 
1 - 5 of 5 Posts
Top