Yamaha R6 Forum: YZF-R6 Forums banner

1 - 18 of 18 Posts

·
Registered
Joined
·
366 Posts
Discussion Starter · #1 ·
I was wondering if there was a place where i could get not necessarily a cheap quality bike stand but cheap in price? All im really looking for is a rear stand.

Any help would be appreciated, thanks!!
 

·
Intermediate Knee Dragger
Joined
·
1,309 Posts
The T-Rex stands on eBay are popular for being decent quality with a low price. They certainly look better than the super cheap crap stands I bought...
 

·
I heart my R6
Joined
·
464 Posts
I ordered a redline stand (vendor on here) Its a piece of crap, they didnt even pakcage the thing so they can "cut shipping costs" and the powdercoat got all damaged/chipped off top to bottom durring shipping and it looks like complete ass

Also the left side is taller than the other (whoever was welding and cutting the metal didnt measure very good) so when the bike is on the stand it leans over to 1 side looking all retarded, I adressed the issues to them but they just ignored me. :mad:

after shipping i only saved 20 bucks compared to some of the best looking/quality stands at my local dealership...i wish i just got a super high quality stand at my local shop :(
 

·
Registered
Joined
·
114 Posts
do NOT get cheap stands, you will regret it. spend the extra $40 and get good ones.
 

·
I stall my R6
Joined
·
148 Posts
I ordered some T-Rex stands from Ebay. Don't go too cheap or you are going to be pissed when your bike falls or falls on you.
 

·
Registered
Joined
·
366 Posts
Discussion Starter · #8 ·
alright thanks guys, sounds good, the t-rex stands are only about $60 plus shipping on ebay!
 

·
Site Sponsor- I eat my R6
Joined
·
267 Posts
I ordered a redline stand (vendor on here) Its a piece of crap, they didnt even pakcage the thing so they can "cut shipping costs" and the powdercoat got all damaged/chipped off top to bottom durring shipping and it looks like complete ass

Also the left side is taller than the other (whoever was welding and cutting the metal didnt measure very good) so when the bike is on the stand it leans over to 1 side looking all retarded, I adressed the issues to them but they just ignored me. :mad:

after shipping i only saved 20 bucks compared to some of the best looking/quality stands at my local dealership...i wish i just got a super high quality stand at my local shop :(
I can't imagine how you received one of our stands with the coating torn up. We spend about 20-30 minutes on each stand in packaging alone...??? Also, if you say that the stand is not level on each side that's hard to imagine but I suppose it's not impossible. After making 5300 stands I suppose one could have made it through with an imperfection. I've also never received a response from a customer like this and ignored them. This makes me wonder if your emails are lost in the spam folder??? At any rate it's un-acceptable to have this happen so naturally we need to fix it. Please email me your address to send a FedEx call tag truck along with the day you can have it picked up. If I don't respond then I never got the email so call me. We'll pay the shipping back and after measuring the stand and determining that it is indeed incorrect we'll send you a new replacement. My apologies for the mishap. Mistakes happen, it's part of life; I only ask for the opportunity to make it right. Thanks.

Ian
901-351-4764
[email protected]
www.redlinestands.com
 

·
Will work for track time
Joined
·
19,491 Posts
I can't imagine how you received one of our stands with the coating torn up. We spend about 20-30 minutes on each stand in packaging alone...??? Also, if you say that the stand is not level on each side that's hard to imagine but I suppose it's not impossible. After making 5300 stands I suppose one could have made it through with an imperfection. I've also never received a response from a customer like this and ignored them. This makes me wonder if your emails are lost in the spam folder??? At any rate it's un-acceptable to have this happen so naturally we need to fix it. Please email me your address to send a FedEx call tag truck along with the day you can have it picked up. If I don't respond then I never got the email so call me. We'll pay the shipping back and after measuring the stand and determining that it is indeed incorrect we'll send you a new replacement. My apologies for the mishap. Mistakes happen, it's part of life; I only ask for the opportunity to make it right. Thanks.

Ian
901-351-4764
[email protected]
www.redlinestands.com

Awesome :fact
 

·
Registered
Joined
·
1,477 Posts
I can't imagine how you received one of our stands with the coating torn up. We spend about 20-30 minutes on each stand in packaging alone...??? Also, if you say that the stand is not level on each side that's hard to imagine but I suppose it's not impossible. After making 5300 stands I suppose one could have made it through with an imperfection. I've also never received a response from a customer like this and ignored them. This makes me wonder if your emails are lost in the spam folder??? At any rate it's un-acceptable to have this happen so naturally we need to fix it. Please email me your address to send a FedEx call tag truck along with the day you can have it picked up. If I don't respond then I never got the email so call me. We'll pay the shipping back and after measuring the stand and determining that it is indeed incorrect we'll send you a new replacement. My apologies for the mishap. Mistakes happen, it's part of life; I only ask for the opportunity to make it right. Thanks.

Ian
901-351-4764
[email protected]
www.redlinestands.com


IAN i've been looking for some stands also and now i know where i'll be purchasing my stands from thats very noble of you i'm glad there are stil human beings like you left in the world :usa
 

·
Do Work!
Joined
·
999 Posts
I ordered a redline stand (vendor on here) Its a piece of crap, they didnt even pakcage the thing so they can "cut shipping costs" and the powdercoat got all damaged/chipped off top to bottom durring shipping and it looks like complete ass

Also the left side is taller than the other (whoever was welding and cutting the metal didnt measure very good) so when the bike is on the stand it leans over to 1 side looking all retarded, I adressed the issues to them but they just ignored me. :mad:

after shipping i only saved 20 bucks compared to some of the best looking/quality stands at my local dealership...i wish i just got a super high quality stand at my local shop :(
I ordered a redline stand from the vendor on here and mine turned out great. That sucks that yours didn't work out for you because the one I received works great. Im even thinking about purchasing the front from redline. You probably just got a bad one out of the bunch. Pitbull is probably your best best but since you want something cheap but good I would recommend redline any day.
 

·
Site Sponsor- I eat my R6
Joined
·
267 Posts
IAN i've been looking for some stands also and now i know where i'll be purchasing my stands from thats very noble of you i'm glad there are stil human beings like you left in the world :usa
Thanks. I know I can't please every single customer I get over a period of years but it won't be for lack of effort.

Ian
 
1 - 18 of 18 Posts
Top