Yamaha R6 Forum: YZF-R6 Forums banner

1 - 2 of 2 Posts

·
Lets hit some corners!
Joined
·
22 Posts
Discussion Starter · #1 ·
If check engine light comes on for 2 seconds and goes off and doesn't flash a code. And the bike is running fine. Does it mean anything? It's a 09 R6and has a self-diagnosis device. The light doesn't stay on. Just asking before I take it in. It should flash a code if something is wrong according to the manual. if this has happened to any body else. Please let me knows what's up! Thank you!
 

·
nova r6
Joined
·
3,228 Posts
Go into the diagnostics on the dash, one of the sections shows all stored codes even if they are not current (at least on my 05)

check here
http://www.r6messagenet.com/forums/pdf/LIT-11616-21-61.pdf

Page 8-40 starts the self diagnostics procedures

This will tell you what the light came on for.
 
1 - 2 of 2 Posts
Top