Yamaha R6 Forum: YZF-R6 Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hello all, so I race dirt micro sprints which run on 600cc motorcycle motors. The motor I run is an 05 Yamaha Black and Silver R6 motor. A week ago I bought this motor that had been ran by a guy at my local track for 2 races since it had been completely gone through and he had no issues with his clutch. He literally unbolted his cable engine bracket and handle and gave it to me with the motor so I could just throw it on and go. Well I cant seem to do that at all, and I'm not sure what I am doing wrong. I have watched countless videos on clutch adjustments and cable adjustments and I'm obviously not doing something right. Either my cable is too "short" meaning its too tight, or its too loose and by the time I adjust the handle all the way it still wont fully grab. I have the alignment dots on the clutch basket and the arm lined up and like I said it was ran 2 weeks ago in another car and he had no issues so I'm not doing something right. Any help would be greatly appreciated guys.

Thanks,
Nate
 
1 - 1 of 1 Posts
Top