Yamaha R6 Forum: YZF-R6 Forums banner

1 - 20 of 23 Posts

·
2 Fast 4 U
Joined
·
130 Posts
Discussion Starter #1
Does NE1 here use competion werkes tail tidy.. I wanna clean up my tail section n CW seems the way to fo. Hot boddies 1 looks good also but it seems like the plate wld touch the swing arm on bumps... is this true? NE pics on the CW tail tidy?
 

·
2 Fast 4 U
Joined
·
130 Posts
Discussion Starter #3

·
Registered
Joined
·
917 Posts
hotbodies is JUNK if you were considering getting an undertail I would avoid them and rumble concepts because the colors dont match and it doesnt fit good at all. the way i cleaned up my 06 (not sure if this works for the 08) is took all the spaceship looking crap off the back and mounted my license plate on the 2 black push pins on the undertail. When you first put it on you wonder how anyone can see it but if you're in a car behind it you can see it fairly well. Havent been screwed with by any cops yet and it didnt cost me a cent
 

·
2 Fast 4 U
Joined
·
130 Posts
Discussion Starter #6
hotbodies is JUNK if you were considering getting an undertail I would avoid them and rumble concepts because the colors dont match and it doesnt fit good at all. the way i cleaned up my 06 (not sure if this works for the 08) is took all the spaceship looking crap off the back and mounted my license plate on the 2 black push pins on the undertail. When you first put it on you wonder how anyone can see it but if you're in a car behind it you can see it fairly well. Havent been screwed with by any cops yet and it didnt cost me a cent

Just checked yr bike out.. looks really good. My girls in love with it. She loved yellow. Just wondering what undertail your using?
 

·
Registered
Joined
·
917 Posts
i was using a rumble concepts undertail and its probably the worst thing i ever put on my bike. i dont have an undertail mounted my license plate on the 2 black push pins that are on the bottom of the tail section
 

·
2 Fast 4 U
Joined
·
130 Posts
Discussion Starter #9
i was using a rumble concepts undertail and its probably the worst thing i ever put on my bike. i dont have an undertail mounted my license plate on the 2 black push pins that are on the bottom of the tail section
NE pics of it?
 

·
Premium Member
Joined
·
18,792 Posts
I use the CustomLED BlisterX integrated tail light with the graves FE. I think it looks fine. The plate is held on by one screw so I can easily remove it on track days.
 

·
2 Fast 4 U
Joined
·
130 Posts
Discussion Starter #12
Is this what you mean?



Blank... thats the 1 man. how much did u get it for and what your opinion on it? NE mre pics?
 

·
Registered
Joined
·
733 Posts
Yeah I would love to get a mount like that.
 

·
Registered
Joined
·
917 Posts
yes black that is exactly the one I have, tick flip for some reason you're not listening to what I am saying. If you want to get a fender eliminator like me an blanks all you have to do is take the 2 black push pins out of the undertail put your license plate over those holes and put them back in, it doesnt cost you a cent man
 

·
Registered
Joined
·
45 Posts
Hey i had that cometition werkes set up and it sucks big time. Mine fell apart and it tears up our bike, because a lot of parts rub. I threw mine away, and bolted my plate to the under tail like Devin was saying.
 

·
Registered
Joined
·
733 Posts
yes black that is exactly the one I have, tick flip for some reason you're not listening to what I am saying. If you want to get a fender eliminator like me an blanks all you have to do is take the 2 black push pins out of the undertail put your license plate over those holes and put them back in, it doesnt cost you a cent man
And what about your reflectors?
 

·
Registered
Joined
·
733 Posts
There isn't any reflectors once you take the rear wing off.
I know this but he has them mounted with his plates on where the clips are.
 
1 - 20 of 23 Posts
Top