Yamaha R6 Forum: YZF-R6 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter · #1 ·
I read on the R6 ez board that you can twist the s bend pipe on a yoshi or akra and it will kinda be a high mount... have any of you done this? how hard was it . Yoshi makes a kit that is like 180 for the s bend and bracket.... if i can just twist my standard s bend that comes with the full system id rather do that cause its FREE! ahaa :)

TIA!
 

·
Registered
Joined
·
16 Posts
Discussion Starter · #4 ·
jasamb said:
Try loosening all the mounting bolts from the collector back, then twist it and play withth the setup to see if it makes a difference. If yours hasa spring that holds the can on the s bend tube, you may have to take it off.

I didnt like how mine mounted at first so I did this and was able to adjust it to where it looked perfect!

sweet do you have any pics?

yea my yoshi system is springs so i guess it will be trial and error time ahahaha
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top