[bluroket]

okay i just tried to install the bar end mirror and i cant seem to fit on the handle bar. do i need an adaptor? if so where can i get the adaptor only???

 

[MaxxxEdge]

Yes. Directly from CRG...

http://constructorsrg.com/mirrors/adaptor.html

 

[OneCheekRider]

after you get the adaptor and if you're putting it on your 07 r6, and you're keeping the stock clip-ons, you should cut off the end piece with a dremmel and sand/buff it down so you can just screw it in like the stock bar ends. That way if you ever do a track day, you can unscrew it real fast and put bar-end sliders in. That's what i did and it's real convenient and looks sharp (in my opinion). Let me know if you wanna see some pics! Otherwise you'll have to take out the screw in portion and it's kinda a pain in the ass.

 

[redwood650]

As Max said,
Try this link as well.. These guys rock

http://www.motosport.com/street/sea...ist=1&CAWELAID=58478985&segment=badger-street

 

[bluroket]

after you get the adaptor and if you're putting it on your 07 r6, and you're keeping the stock clip-ons, you should cut off the end piece with a dremmel and sand/buff it down so you can just screw it in like the stock bar ends. That way if you ever do a track day, you can unscrew it real fast and put bar-end sliders in. That's what i did and it's real convenient and looks sharp (in my opinion). Let me know if you wanna see some pics! Otherwise you'll have to take out the screw in portion and it's kinda a pain in the ass.

Thanks guys, I would like a picture. Because I will do some track time this summer. That is one of the reasons i got rid of the mirrors and blocked it off.