Yamaha R6 Forum: YZF-R6 Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 · (Edited)
Whats up guys, new to this forum. I bought a 2014 Yzf-r6 and like many, I took off that ugly rear fendor lol. I also got a motodynamics dark smoke taillight and one particular cop in my area gave me a few tickets for it and for not having proper signals. My integrated signals werent good enough so I went ahead and bought a set of leds from mysportbikemods.com for about $57 and made a DIY on how to install it. I did it so that the wiring will be easy and clean so you dont have 100 things bunched up under your seat. I will be making more DIY videos soon. Thank you for your interest. Ride safe.

http://youtu.be/sKAeO79mHxA

Motodynamics Intergrated Taillight with Sequential Turn Signals: Approx. $78
http://www.motodynamic.com/yamaha/led-tail-lights/yzf-r6-r6s.html

Passenger Peg LED's: Approx $56
http://www.mysportbikemods.com/products/passenger-peg-blinkers/

Tools Needed:
-Wire Strippers/Cutters
-Cutting Pliers
-Electric Tape
NOTE: YOU CAN TRIM THE WIRES A LITTLE SHORTER LIKE I DID FOR A CLEANER SETUP.

I will be showing you guys how to install passenger peg LED's into a 2014 Yamaha R6. I'm sure this installation process can work for any other bike since the wiring is pretty much the same, just slightly different on the signals colors for certain manufacturers.
 

Attachments

1 - 1 of 1 Posts
Top