Yamaha R6 Forum: YZF-R6 Forums banner
1 - 3 of 3 Posts

· Registered
Joined
·
67 Posts
Discussion Starter · #1 ·
I posted this in another thread but I decided to make a new
thread so it wouldn't get lost in the other thread.......

Ok.... so this is what I am doing to my '08 R6....

Graves Full Carbon Full Exhaust (Non Ti)
Bazzaz Injection Mod....

I am wondering if I should change my gearing
and do a 520 conversion (-1/+2)
How much torque will I gain and how much HP will I lose?
 

· Mr. B (Florida Boy)
Joined
·
1,530 Posts
I posted this in another thread but I decided to make a new
thread so it wouldn't get lost in the other thread.......

Ok.... so this is what I am doing to my '08 R6....

Graves Full Carbon Full Exhaust (Non Ti)
Bazzaz Injection Mod....

I am wondering if I should change my gearing
and do a 520 conversion (-1/+2)
How much torque will I gain and how much HP will I lose?
Dont know but I'm doing all of that too on top of smog block off plates (www.tobefast.com)<---were the cheapest I heard it's going to be a VERY PLEASANT kick in the pants.:lmao
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top