Yamaha R6 Forum: YZF-R6 Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hi guys,

I am a bit of a noob to this forum and been nosing through some of the posts which have been really helpful!

I am after some advice as I recently purchased some MJS headers for my race bike along with a PC5. As expected it is pretty damn loud (Sounds amazing) but unfortunately due to the strict laws in the UK (2011 noise laws are even worse) its going to be a bit too loud for the track. I am running a MTC can which is fairly big bore and stubby which wont be helping but even with a DB killer in its way over the top.

Spoke to the guy from MTC who has been brilliant and said he may be able to fabricate a link pipe and bigger can to get the noise down however just though I would see if anyone was aware of any systems out there which would get the noise right down? Or any other ideas?

Definitely don’t want to be running a CAT.

Here are a few pics of her…





 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top