Yamaha R6 Forum: YZF-R6 Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter · #1 ·
It's an odd question, for an odd project.

To ride my r6 on the street from time to time, in mostly track trim, I want to throw a headlight of sorts on it. I don't want to mess w the oem wiring.

So, can someone tell me what type and size of connector is the female side of the headlight harness, the part that the headlight has on it to plug into the bike's harness? And where to get one (specific, like a site, not at a local x, y or z, as I haven't been able to find one)?

I want to wire it into a driving light that I'll use as a headlight, and then I can take it off easy for the track.

Sorry for the typo in the title.

Thank,

R
 

·
I ride my wife and her R6
Joined
·
101 Posts
That's the lightbulb that plugs into the harness. You can just use crimp on blade connectors and plug them into the harness to connect another headlight. Get the same width as the blades on the bulb. If you are really keen you will solder and heatshrink the connections to the blade connectors.
 
1 - 2 of 2 Posts
Top