Yamaha R6 Forum: YZF-R6 Forums banner
1 - 1 of 1 Posts

· Registered
1,117 Posts

any of these that say no cut will work.

i got these:


installed just fine except the bolt jumped the thread on the flat metal extender. i reccomend going to home depot and buying better bolts to replace the 2 black ones though, they are weak and jump threads easily (thankfully it jumped on the extender so i drilled the bolt out and ran a bolt/nut through it). my buddy's gixxer had one jump the thread inside the engine mount and he has to get it drilled out and re-tapped by a metal tech...gonna run him about 50 bucks.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.