[Dan04r6]

Hey im tryin to put on flush mount blinkers on my new r6 and it looks like there is 3 wire commin from the stock light and my new flush mount only has a red and black wire. Please help

 

[stoneloco808]

you basically have 3 choices.

1) use it just for turn signals.

2) use it just for parking lights.

3) do a combo, parking/turn signals. but if you do it this way you would have to invest in 2, 5 prong relays, 22 guage wire, soldering iron, solder and some heat shrink. there is a thread with the wiring schematic for this option somewhere in this section. or you could find it in the image gallery.

 

[nvrider]

huh?? all you need is to buy 20 watt 5ohm resistors and connect between them