Yamaha R6 Forum: YZF-R6 Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
9 Posts
Discussion Starter · #1 ·
So I recently purchased a 07 R6S. The guy I bought it from removed the front turn signals and was going to put on flush mount signals. He gave me some front flush mount signals that will work however the signals only have 2 wires coming from it no plug or harness.

I didn't think much of it to ask for the original turn signals to get the factory plug and solder into the new flush mounts...

My problem is that there isn't enough room or wiring to solder the flush mounts to the existing harness on the bike so I am needing the factory "male" end of the harness plug. Anyone know where I can get that plug or an easy way to make it work?
 

· Stunt Rider
Joined
·
7,950 Posts
Got pics?
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top