[Got20z]

Hey guys,


I bought one of the cheap gear indicators on eBay so I figured I'd give it a shot wiring it up. For those of you who know the wiring on these bikes well or have wired one of these up I am trying to figure out which colored wires I need to find to wire this thing up.

I would like to just wire it in near the gauge cluster if possible so I don't have to lengthen the wires that are on the gear indicator.

Anyway, looking for colors on the:

12-volt positive (ignition)
Tachometer pulse
Speedo pulse
Neutral light

The instructions also list a learn/setup connection in addition to those above.

The bike is a 2007.

The instructions that came with it aren't much to brag about so I was hoping I might find some luck here.

Thanks for any help.

 

[adamb]

http://www.r6-forum.com/forums/showthread.php?t=198361

http://www.r6-forum.com/forums/showthread.php?t=150337

 

[Got20z]

Thanks for the links but that doesn't clear it all up.

It seems each generation of these bikes has different wiring.

Example: In that link above it says the crank position sensor plug wires are black/blue and grey. On my bike it appears they are grey and dark grey.

Can anybody post up any pics of a 2007 crank position sensor? I've searched high and low and this simple install has become a major pain in the ass.

I am to the point of programming the unit while running the bike through the gears but it will not program so I think my issue is with the CPS being hooked up wrong.

 

[adrianpl]

Bump, did you figure it out. I have a 06 r6 that i am trying to wire