I ended up hooking it up like my drawing, except I substituted my single harness for the 2 harnesses, and it all worked as desired. Now I just need to throw a switch on the demon eye, which will be simple, and I’ll be all set.
Headlight Assembly Mod
Hey everyone - I haven’t posted here in years. Actually had to sign up again since it’s been so long, lol.
I had a 2001 R6 and since 2011 have had the candy red/raven skull edition. It only has 9k miles and looks new.
Anyway, on to the reason for my post. I was one of the first to get a BK Moto kit from Boris and then post a review on here. I had 2 white halos, red demon eyes, and projectors/HIDs. The halos were CCFLs.
I say “were” because few weeks ago, an older woman backed into my pristine baby while it was parked at the gym and knocked it over. I watched the whole thing go down but was unable to stop it.
My headlight assembly was damaged, although all of my lights still worked. Because it was so much work to do it, I opted for a pre-made one on Amazon to replace it. It’s well made and I confirmed all are working - blue angel, red demon, and 6k HIDs.
Unfortunately, the guy who makes and sells them doesn’t even own a bike, so he doesn’t know how to install.
I drew a diagram of how I “think” it should be wired but would love some feedback/opinions. I did this based on the BK Moto videos and how I think my old original one was wired. The switch is for the HIDs so I can keep them off. I also may want to add a switch for the demon eyes this time as these are really bright, in case I get hassled by the police.
Does this look right?
![Product Rectangle Slope Font Line]()
Thanks in advance!!
I had a 2001 R6 and since 2011 have had the candy red/raven skull edition. It only has 9k miles and looks new.
Anyway, on to the reason for my post. I was one of the first to get a BK Moto kit from Boris and then post a review on here. I had 2 white halos, red demon eyes, and projectors/HIDs. The halos were CCFLs.
I say “were” because few weeks ago, an older woman backed into my pristine baby while it was parked at the gym and knocked it over. I watched the whole thing go down but was unable to stop it.
My headlight assembly was damaged, although all of my lights still worked. Because it was so much work to do it, I opted for a pre-made one on Amazon to replace it. It’s well made and I confirmed all are working - blue angel, red demon, and 6k HIDs.
Unfortunately, the guy who makes and sells them doesn’t even own a bike, so he doesn’t know how to install.
I drew a diagram of how I “think” it should be wired but would love some feedback/opinions. I did this based on the BK Moto videos and how I think my old original one was wired. The switch is for the HIDs so I can keep them off. I also may want to add a switch for the demon eyes this time as these are really bright, in case I get hassled by the police.
Does this look right?
Thanks in advance!!
1 - 3 of 4 Posts
1 - 3 of 4 Posts
