Yamaha R6 Forum: YZF-R6 Forums banner
1 - 3 of 3 Posts

·
I used to have an R6...
Joined
·
63 Posts
Discussion Starter · #1 ·
The bike I now own had a flo commander shoved insid the air box. I am trying to hook it up and tune it right. I have a dead spot (rapid deceleration) at full throttle with the screw about 2 1/2 turns from closed.
My Q's are: What are obvious factors of A/F mixture?
I seem to have more black residue at the exhaust
Does anyone else have the flo commander if so could I get a little help please....
P.s. The thing is pretty wicked I noticed big difference (until full throttle :wtf )
 

·
Banned
Joined
·
4,008 Posts
wow flo cammander hasnt been brought here in forever. well i personally have no clue as to why its doing that but do a search for flo cammander here and see what you can find. i know it has been a topic of discussion a few times. other then that i would say contact the flo people and see what they say :cheers
 

·
Registered
Joined
·
1,338 Posts
If your problem is at top end Rpm's, i'm guessing it's not your flo-commander. If it is, something in the installation of it was done improperly, or when it was tuned before the installation of it they got the jetting all whacked out.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top